Sistemas de Nitrógeno Para Soldar


                      

Especificaciones Hakko FM 2026 KIT

Model Name FM-2026
Part Number FM2026-01
Power Consumption 70W
Tip-to-Ground Resistance < 2 ohm
Tip-to-Ground Potential < 2 mV
Cord 1.2 m
Total length (w/o cord) 205 mm (with 2.4D shape tip)
Weight
(w/o cord)
45 g (with 2.4D shape tip)
Contents FM-2026  (1 pc)
Retaining clip for iron holder  (1 pc)
Soldering tip and nozzle assembly NOT included
 

Soldering Iron Options
 
B2974

Sleeve cover

B2765C Sleeve assembly  (yellow)
B2768C Sleeve assembly  (orange)
B2769C Sleeve assembly  (blue)
B2998 N2 guard

Nitrogen Controller
 

Model Name FX-791
Part Number FX791-01
Outer Dimensions 2.76(W) x 4.76(H) x 5.28(D) in.
(70 x 121 x 134 mm)
Weight 1.3 lb. (600g)
Input Gas Pressure 0.2 - 0.9 MPa
(28 - 129 psi)
Output Gas Flow 0.25 - 25 l/min
Input Hose 6.0 mm OD (not included)
Contents FX-791  (1 pc)
 
Nitrogen Generator
Model Name FX-780
Part Number FX780-01
Air Supply Pressure 44 - 102 psi  (0.3 - 0.7 MPa)
Concentration of Generated Air 99.9 % (max)
Generated N2 Gas Flow 1.5 l/min when 0.5 MPa of air supply pressure is supplied at 25°C,
the concentration of
generated N2 gas is 98%
Outer Dimensions
(w/o sockets and valve)
2.9(W) x 11.1(H) x 2.8(L) in.
(73 x 282 x 71 mm)
Weight (w/o rack) 3.3 lb.  (1.5 Kg)
Contents

FX-780  (1 pc)
Rack and screws  (1 set)

 

_______________________________________________________________

 

 

Características HAKKO FM 2026 KIT

El sistema de soldadura Hakko N2 es la solución ideal para todas las aplicaciones de la mano-de soldadura sin plomo. La sobremesa FX-780 Generador de Nitrógeno crea gas nitrógeno de aire filtrado y seco comprimido y el controlador de Nitrógeno FX-791 y FM-2026 Soldador lo entrega de manera eficiente y de manera uniforme a la zona de soldadura.

NOTA: Si usted no tiene la disponibilidad de nitrógeno en su puesto de trabajo, el compacto FX-780 Generador es la mejor opción para tu bolsillo.

Accesorios Hakko FM 2026 KIT

 
Part No: T17-B2
CONICAL,N2,R0.5 x 10mm
 
Part No: T17-BC1
BEVEL,N2,1mm/45° x 11.5mm FM 2026
 
Part No: T17-BC2
BEVEL,N2,2mm/45° x 11.5mm FM 2026
 
Part No: T17-BC3
BEVEL,N2,3mm/45° x 10mm FM 2026
 
Part No: T17-BCF1
BEVEL,N2,1mm/45° x 11.5mm/TINNED FACE ONLY FM 2026
 
Part No: T17-BCF2
BEVEL,N2,2mm/45° x 11.5mm,TINNED FACE ONLY FM 2026
 
Part No: T17-BCF3
BEVEL,N2,3mm/45° x 10mm,TINNED FACE ONLY
 
Part No: T17-BCM2
TIP, BEVEL, N2, w/INDENT, 2mm/45° x 11.5mm, FM-2026
 
Part No: T17-BCM3
TIP, BEVEL, N2, w/INDENT, 3mm/45° x 10mm, FM-2026
 
Part No: T17-BL
LONG CONICAL,N2 FM 2026
 
Part No: T17-D08
CHISEL,N2,0.8 x 9.5mm FM 2026
 
Part No: T17-D16
CHISEL,N2,1.6 x 10mm FM 20296
 
Part No: T17-D24
CHISEL,N2,2.4mm x 10mm FM 2026
 
Part No: T17-J02
BENT,N2,R0.2mm/30° x 3.5mm x 12mm FM 2026
 
Part No: T17-KF
KNIFE,N2,4.7mm/45° x 17mm FM 2026
 
Part No: T17-KR
KNIFE,N2,4.7mm/45° x 15mm FM 2026
 
Part No: T17-KU
KNIFE,N2,3mm/45° x 11mm FM 2026

Documentos Técnicos HAKKO FM 2026 KIT

 FM2026e20110506 Hakko FM2026 User Manual Rev. 2011-05
Released 6/8/2011
Document Category: Manual